Mr. Liu Bin
Leave a message Mr. Liu BinWhat can I do for you?
SHIJIAZHUANG LONGXUAN TRADING CO., LTD
Mr. Liu Bin
Leave a message
Open rubber and plastic mixing is the rubber factory used to prepare plastic rubber, rubber or hot refining, a type of roller exposed rubber refining machinery. This machine is suitable for EVA,rubber,synthetic rubber,hot melt and all kinds of chemistry raw material to mix ,mediate and disperse, and then put into the mass production. It is the best choice to test, make sample and learning in school.
16inch automatic crusher mill
Advantage
1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.
2. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long service life.
3. Self-aligning bearing is well matching with the bearing inside leakage-proof device. The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.
4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.
5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.
6. This machine is installed with overload protection device which protect the machine will not broken if the machine is overload. The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.
7. The [U" shape frame is whole set casting, but other factory welded together.
8. The machine base is welded by national standard I steel.
Main parameter
| Name | A Automatic crusher mill |
| Front roller diameter (mm)(Smooth roller) | 400 |
| Rear roler diameter (mm)(Groove roller) | 450 |
| Roller length(mm) | 840 |
| Front roller speed (m/min) | 12.67 |
| Speed ratio | 1:1.63 |
| Max roller gap(mm) | 10 |
| Nip adjustment | Manual |
| Mixing capacity(kg) | 20 |
| Power (kw) | 45-8 |
| Motor RPM(r/min) | 740 |
| Reducer ratio | 45 |
| Reducer model | 315 |
| Roller bearing diameter(mm) | 260 |
| Bearing mode | 352952YA |
| Bearing size(mm) | 360×260×150 |
| Name | B mixing mill |
| (mm) Front roller diameter(smooth roller) | 400 |
| Rear roller diameter (mm)(smooth roller) | 400 |
| Roller length(mm) | 840 |
| Front roller working speed (m/min) | 19.36 |
| Speed ratio | 1:1.5 |
| Max roller gap(mm) | 10 |
| Nip adjustment | Manual |
| Mixing capacity(kg) | 20 |
| Power (kw) | 37KW |
| Motor RPM(r/min) | 980 |
| Reducer ratio | 45 |
| Reducer model | 315 |
| Roller bearing diameter(mm) | 260 |
| Bearing model | 352952YA |
| Bearing size(mm) | 360×260×150 |
Hot Products
New Products
