High Frequency Oil Bag Welding Machine_Automation Equipment

High Frequency Oil Bag Welding Machine_Automatic Equipment High Frequency Machine Application:
Pure PVC or any soft and hard rubber containing PVC of 30% or more can be processed for special applications such as leather or cloth. For example: footwear, trademarks, albums, business card books, book covers, document bags. Raincoats, umbrellas, rain sails, handbags, wardrobes. Chair backs, upholstery, headrests, bags, carpet embossed, inflatable toys, electronics, watches, hardware tools, visors, door panels, car seats and other hard shell packaging or blister packaging.
High Frequency Oil Bag Welding Machine_Automation Equipment Features:
High frequency machines are high frequency welding machines and high frequency sealing machines. At present, it is the induction heating equipment that has the highest heating efficiency, the fastest speed, and low energy consumption, energy saving and environmental protection for plastics and plastic materials. In operation, the high-frequency current of the high-frequency machine flows to the copper pipe (heating coil). And in the heating coil to generate a momentary change of strong magnetic flux, and quickly into the machine installed on the pressure plate mold. The processed material is in the upper platen, and the magnetic beam penetrates the entire heated object, so that the processed parts move rapidly and are forcibly connected according to the direction of the electric field, thereby achieving the purpose of welding. The customer's products processed through high-frequency machining are beautiful in appearance, excellent in quality, and perfectly meet the requirements of customers.
High frequency oil bag welding machine_Automation equipment working principle:
Working principle: (1) It is a dielectric material. Under the action of high-frequency electric field, the phenomenon of molecular polarization occurs. According to the direction of the electric field, due to the high-frequency electric field, changing the direction at an extremely fast speed, the dielectric material will suffer from dielectric loss. And fever. (2) High-frequency plastic welding equipment belongs to high-frequency medium heating equipment. (3) The output power of the powerful local oscillator is 27.12MHZ or 40.68MHZ, which is in line with the international industry standard. Various control device special electronic circuits can avoid improper operation, and can weld products and increase product output in the fastest time.
High Frequency Oil Bag Welding Machine_Automation Equipment Equipment Quality:
One year warranty, lifetime maintenance. Professional guidance, excellent quality. You are the only choice /
The control circuit of the instrument must be installed at the terminal block. The spark detection line and the gate resistor midpoint connection use high voltage single core shielded wire. Spark lines do not require shielded wires. Gate resistor midpoint connection, single-head machine may use shielded wire, due to passing coordinator next to, where the high frequency is too strong; double-headed machine is also best to use shielded wire, if the use of ordinary wire, or need tight Stick the chassis board and avoid the lower mouth of the high-frequency barrel. The withstand voltage of shielded wire is above 2000V. Strictly prevent flashover and short circuit between the midpoint connection of the gate resistor and the case. For example, the weather is hot in summer, the fan cooling performance of the machine is not good, there are too many dust particles to join the salesman's room, and the three-phase voltage is quite high, all of which are directly or indirectly caused by high frequency, high-frequency machine equipment, electronic tube burned out the reason. For the electron tube failure caused by the above reasons, it requires us to strictly follow the method used in the introduction book when using high-frequency equipment. Usually we need to carry out the necessary maintenance on the high-frequency machine (here you can refer to the articles I published in the past are not careful Introduced), the instrument can be cleaned regularly, kept clean, and used high-frequency equipment in summer. Of course, it is suggested that this fault, but the reason of seasonal temperature, be able to keep the ventilation of the plant as much as possible and allow the heat generated by the equipment to be distributed in time. Once the equipment fires in the welding time, the spark detection circuit will get the same negative pulse signal, the electronic switch will turn on immediately, and the negative high-voltage current will be added to the gate resistance of the high-frequency oscillation tube through the electronic switch and the spark relay coil. At this point, the oscillating tube immediately stops oscillating due to negative gate bias, cutting off the high-cycle output.
The control circuit of the instrument must be installed at the terminal block (4) The spark detection line and the gate resistor midpoint connection are shielded with high voltage single core. Spark lines do not require shielded wires. Gate resistor midpoint connection, single-head machine may use shielded wire, due to passing coordinator next to, where the high frequency is too strong; double-headed machine is also best to use shielded wire, if the use of ordinary wire, or need tight Stick the chassis board and avoid the lower mouth of the high-frequency barrel. The withstand voltage of shielded wire is above 2000V. Strictly prevent flashover and short circuit between the midpoint connection of the gate resistor and the case. For example, the weather is hot in summer, the fan cooling performance of the machine is not good, there are too many dust particles to join the salesman's room, and the three-phase voltage is quite high, all of which are directly or indirectly caused by high frequency, high-frequency machine equipment, electronic tube burned out the reason. For the electron tube failure caused by the above reasons, it requires us to strictly follow the method used in the introduction book when using high-frequency equipment. Usually we need to carry out the necessary maintenance on the high-frequency machine (here you can refer to the articles I published in the past are not careful Introduced), the instrument can be cleaned regularly, kept clean, and used high-frequency equipment in summer. Of course, it is suggested that this fault, but the reason of seasonal temperature, be able to keep the ventilation of the plant as much as possible and allow the heat generated by the equipment to be distributed in time. Once the equipment fires in the welding time, the spark detection circuit will get the same negative pulse signal, the electronic switch will turn on immediately, and the negative high-voltage current will be added to the gate resistance of the high-frequency oscillation tube through the electronic switch and the spark relay coil. At this point, the oscillating tube immediately stops oscillating due to negative gate bias, cutting off the high-cycle output.